Format Thumb Drive Mac Fat32

If you need to format a USB flash drive, HDD, SDD, or some other form of storage to FAT32, you've come to the right place.

In this article we'll go over what a file system is, the FAT32 standard, and several ways to format a storage device to FAT32 on Windows 10.

What's a file system?

Find out How to format USB to FAT32 on Mac easily? How to format flash drive on Mac? How to format pendrive on Mac?Be Anonymous on the Internet! How to Perform Pen Drive Data Recovery on Mac. Sometimes, users end up formatting a pen drive by mistake as well. If you also have accidentally deleted data on Mac or have formatted a pen drive, then take the assistance of Recoverit Data Recovery Mac.Developed by Wondershare, it is one of the most advanced and trusted data recovery tools for Mac.

A file system is a standardized way of organizing data on a computer storage device like a flash drive or HDD.

A file system divides a storage device into virtual compartments, almost like a wall of post office boxes, and keeps track of all the information that gets stored in each box.

How to Format Pen Drive on Mac. Just like Windows, Mac also allows a seamless solution to do pen drive format. To do this, you can take the assistance of Disk Utility, which is a dedicated system component in Mac. Format to FAT32 If you have an NTFS drive you can use macOS' Disk Utility to reformat it to FAT32. This is simple to do and means the data on your drive/USB stick can be read and written on both. To format a USB drive in FAT32 or exFAT: 1. Plug the USB drive into your Mac.

Some of the most common file system formats for portable storage devices are FAT32, NTFS, and ExFAT.

FAT32 compared to other formats

Of those three common formats, FAT32 is the oldest and most widely supported. Every major operating system will allow you to read and write from a USB flash drive that's formatted to FAT32.

Meanwhile, macOS can only read NTFS drives, and you would need to install third-party software to write back to the drive.

However, though FAT32 is well supported, its maximum drive and file size is severely limited when compared to newer formats like NTFS and ExFAT:

* 1 petabyte is about 1 thousand terabytes
** 1 exabyte is about 1 million terabytes

Note that the maximum drive and file size of NTFS and ExFAT is so large that there's basically no limit. (But it would be nice to have a 128 PB USB drive, wouldn't it?)

On the other hand, FAT32's max file size of 4 GB is almost nothing now that phones can record 4K videos. Also, it's a little more difficult to format a drive larger than 32 GB to FAT32 on Windows 10.

These days, the only reason why you'd choose to format a drive to FAT32 is for compatibility. For example, if you need to boot up an old computer, maybe with a different operating system, and backup some of its files. But you'd need to be sure that none of those files are greater than 4 GB.

If you're sure you want to go with FAT32, here's how to format a storage drive on Windows 10.

Important note: Before you format a drive, make sure that you backup all of your important files. In fact, make two backups, and keep one on a remote service like Google Drive or Dropbox.

Formatting a drive will delete all of the data that's currently on it.

How to use Windows File Explorer to format a USB drive to FAT32

A quick note about this method: it only works on USB flash drives that are less that 32 GB. If your USB drive is larger than 32 GB, check out one of the later methods.

With that out of the way, plug your USB drive into your computer and open Windows File Explorer.

Next, right-click on the drive on the left hand side of the File Explorer window and click 'Format':

In the window that pops up, ensure that 'FAT32' is selected. Also, feel free to rename the USB drive whatever you'd like:

You can leave the rest of the options alone. Just click start to format your drive.

Once it's done, your USB drive should be formatted to use the FAT32 file system.

To double check this, open File Explorer, right click on your USB drive, and click 'Properties'.

A window will pop up and you should see that the file system is now FAT32:

How to use Rufus to format a USB drive to FAT32

If your USB drive is larger than 32 GB, you'll need to use a third-party program like Rufus to format it.

There are lots of other programs that can format USB drives, but Rufus is really small and portable. This means you can stick Rufus right on a USB drive, plug it into any Windows computer, and format other drives on the go.

After you download Rufus, double click on the .exe file to start the application.

Make sure your USB drive is selected. Then, click the 'Boot selection' dropdown and select 'Non bootable':

25 Best Torrent Websites in June 2020. In our selection, the authenticity of the torrent files listed, along with the safety of downloads, reliability of the listing directory, number of genuine torrents listed and the number of seeders were among the more important selection criteria we based our research on. Following a thorough assessment, we compiled a list of the best torrent websites up. Updated for 2020. An online torrent client lets you download torrents online, in your browser, without sharing them and without downloading a torrent program. All you need is a browser like Chrome or Firefox, and a torrent file, which you can get on any torrent website. Another benefit to most online torrent programs is that once you've told the website to load your torrent, you can log out. QBittorrent is a free and open source torrent client that helps users download content off the internet. It is one of the very few torrent clients that offers a minimalist and ad-free user. NOTE: If you are new to torrenting, a Torrent Client will be needed to access torrent files. This software allows users to download content to their favorite device. TROYPOINT has created a list of the Best Torrent Clients to help get you started with this technology. These Torrent Clients are completely free and easy to install for torrent. Torrent clients are not actual people, but rather a method of downloading files that uses a peer-to-peer system. These clients give the digital world a faster way to get large files, such as movies. Best torrent client pc reddit.

Next, click the 'File system' dropdown and select 'FAT32'.

Also, feel free to change the name of your USB drive under 'Volume label':

Then, click the 'Start' button to format your drive. After a few seconds it'll be formatted to FAT32.

How to use PowerShell to format a USB drive to FAT32

While this method works with drives larger than 32 GB, it's really slow – even formatting a 32 GB drive can take up to an hour depending on your computer.

But, if you aren't able to use the previous two methods for some reason, this will work in a pinch.

First, click on the Windows Search Bar and type in 'powershell'. Then, click 'Run as administrator' to launch PowerShell with elevated privileges:

In the PowerShell terminal, enter the following command:

format /FS:FAT32 DRIVE_LETTER:

Use the File Explorer to double check your drive letter. My drive letter was D, so I entered format /FS:FAT32 D:.

Press Enter, make sure your USB drive is plugged in, and press the Enter key again to start the process:

Then go run some errands or something – it will take awhile.

Once the format command is finished, your drive should be formatted to FAT32.

In closing

Now you should be able to format a USB drive of any size to FAT32 on Windows 10. And with just a little modification, any of these methods can be used to format your drive to another file system like NTFS or ExFAT.

Now get out there and format all your USB drives. (But only after you backup everything important!)

Was this helpful? Is there a better method that you know of? Tweet at me and let me know how you format things on Windows 10.

Format Usb Drive To Fat32

Summary: This article tells how to format a USB flash drive on Windows 10/8/7 and Mac when you want to reformat a new or second-hand removable storage device to make sure it doesn't contain any malicious files or fix the logical errors.

What is Formatting？

Formatting is the fastest way to prepare the USB flash drive for the initial use. It wipes all the data stored on your flash drive and allows full use of the storage capacity. Meanwhile, it also creates a filing system that can help organizes your data on Windows or Mac.

Which File System Should I Choose for a USB Flash Drive?

We can't talk about formatting without talking about file system as it differs when we are using the different computers; the common file systems are FAT32, exFAT, and NTFS for Windows, APFS, HFS+, and exFAT for macOS, here we will only talk about the most common file systems when formatting a USB flash drive:

• FAT32: It's compatible with all major operating systems and uses less memory usage. But it cannot handle single files larger than 4GB and has a limited partition size (up to 32GB).
• NTFS: It can create partitions larger than 32GB and read/write files larger than 4GB. Besides, it supports on-the-fly file encryption. The disadvantage is that the Mac computer can only read the data from the NTFS drive.
• exFAT: It provides an unlimited file and partition size. It serves no matter the Windows or Mac users who want to work with files larger than 4GB.

We strongly recommend that you use exFAT, which is considered the best choice for both Windows and Mac computers, whereas the exFAT file system works better than FAT32 and can handle the file size up to 16GB.

How to Format a USB Drive on Windows 7/8/10?

After deciding which file system you are going to apply, let's explore the formatting methods. Generally, On Windows 10, 8, 7, there are some common ways you can format a USB flash drive. Sonic r game free download pc full version windows 10.

Method 1: Format a USB Flash Drive Using File Explorer

This is the easiest way with which many users are familiar. Refer to the following steps to learn how.

Step 1: Connect your USB flash drive and open press Win key + E to open File Explorer.

Format Thumb Drive Mac Fat32 Flash Drive

Step 2: Right-click on the drive and choose the Format option.

Step 3: Expand the File system drop-down menu and select the exFAToption.

Step 4: Click on the Start button.

Note: Uncheck the Quick Format means full format; it goes with a thorough scanning and wiping your data on the USB flash drive, you will have no chance to get back your data after using this option.

Method 2: Format a USB Flash Drive Using Diskpart

Using diskpart to format a USB flash drive is another useful method, and even it works for the computer user who has no exFAT options in File Explorer or Disk Management. However, the user should select the correct volume before carrying out a quick or full format on your USB flash drive:

Step 1: Enter Command Prompt in the search bar and then right-click it, choose Run as administrator.

Step 2: Enter below-written commands in the same order and same diskpart window:

• diskpart
• list volume
• select volume NUMBER (Replace NUMBER to the exact number of your USB flash drive)
• format fs=exFAT quick (Don't enter quick if you want a full format)

Note: Replace exFAT if you choose another file system, for example, enter the command format fs=fat32 to format the USB flash drive into FAT32 format.

Method 3: Format a USB Drive Using Disk Management

This is a method similar to the one performed by using File Explorer, and here are the steps you can follow:

Step 1: Press Win + Q, type in Disk Management and open it.

Step 2: Right-click on the desired USB flash drive and select Format.

Step 3: Select exFAT from the File System drop-down menu.

Step 4: Click on the OK button.

Method 4: Format a USB Flash Drive Using PowerShell (Windows 10 Only)

PowerShell is a task and configuration management platform which was first appeared in 2006; it's powerful than Command Prompt that can be used to automate many different system administration tasks, and of course, for formatting a USB flash drive:

Step 1: Right-click on the Start menu at the lower-left corner and choose Windows PowerShell(Admin).

Step 2: Enter the following command to view the USB flash drive you want to format:

• Get-Volume
• Format-Volume -DriveLetter F -FileSystem exFAT (Replace F to the exact drive letter of your USB flash drive)

Note: In this method, you should note that after entering the format command, it goes to format the USB flash drive to exFAT directly, and if you want a FAT32 drive, just replace exFAT to FAT32, that's all.

How to Perform a USB Drive Format on Mac?

Reformatting a USB flash drive in exFAT on Mac is easy than you imagine; we should thank the Disk Utility that can make the reformatting easy to complete; Likewise, follow with the same steps if you would like to reformat an SD card, internal or external hard drive:

Step 1: Connect the USB stick to the PC with one of the USB ports and then press Command + Space to search Disk Utility.

Step 2: After selecting the drive on the left part of the Disk Utility window, click on the Erase button lying at the top of the window.

Step 3: Now, select exFAT from the drop-down menu of the Format.

Step 4: Click the Erase and wait for the reformatting process to complete.

Note: Please back up your data before the formatting of your USB flash drive as Erase will wipe all of the stored data!

What if you were not intended to format the USB flash drive, and there are lots of the vital photos, videos, documents, or any other files stored on the drive that have been lost due to the reformatting. What should we do to retrieve lost data? Don't worry, a quick format won't cause all of the data to lose, the file contents still exist on the USB flash drive, and you will have a big chance to get back your data as soon as you launch the third-party data recovery program – Bitwar Data Recovery to perform a full scan.

Recover Files From a Formatted Drive Using Bitwar Data Recovery

No matter how carefully or gradually backing up the USB flash drive, the data loss is still inevitable, such as the USB flash drive turns to a RAW drive suddenly, or you might unplug the drive without safely removing from the computer; moreover, the backup files are out-to-dated when the accident happens.

We have experienced many of the users encountered the same frustrating issue that causes the works to stop, and most of them finally chose to start the work again as they didn't know how to restore the data. Right now, you'll be all set if using Bitwar Data Recovery with the steps below:

Step 1: Go toBitwarsoft Download Center to download and install Bitwar Data Recovery.

Step 2: After completing the installation, open the Bitwar data recovery software and then select the formatted USB flash drive.

Step 3: Choose a recovery mode. We strongly recommend you choose the Quick Scan for the first time since this mode scans the whole drive in just a few minutes. However, if this mode can't work to find your data, try with the Deep Scan mode next time.

Step 4: Choose the File types and then press the Scan button.

Step 5: Double-click on wanted files to preview them. After that, click on Recover to save the files to a safe place.

Note: Please be careful not to save the recovered files to the formatted USB flash drive. The reason is to prevent the data from being overwritten again.

Conclusion

Like many other storage devices, The USB flash drive can be easily failed without any concerns. There are many possible causes behind the happening of this accident, such as the unstable flash chip, disconnect the USB flash drive before safely removing from the computer, virus attack, or Trojan infection. Some of the failures are just logic errors that can be fixed easily by reformatting the drive. Some failures prove that your USB flash drive was physically damaged, and that means you may have to consider buying a new one.

If you purchase a brand-new USB flash drive and want an initial usage or the USB flash drive has encountered any logic errors as told, this article serves you very well, as it tells how to format a USB flash drive with different methods on Windows or Mac. What if there were vital data stored on the USB flash drive, it is suggested to retrieve the data using Bitwar Data Recovery before starting the formatting.

Follow with the steps mentioned above and hope that you can finally reformat the USB flash drive or get back the wanted data.

How useful was this post?

Click on a star to rate it!

Average rating 4.9 / 5. Vote count: 11

No votes so far! Be the first to rate this post.

About Bitwar Data Recovery

We strongly recommend that you use exFAT, which is considered the best choice for both Windows and Mac computers, whereas the exFAT file system works better than FAT32 and can handle the file size up to 16GB.

How to Format a USB Drive on Windows 7/8/10?

After deciding which file system you are going to apply, let's explore the formatting methods. Generally, On Windows 10, 8, 7, there are some common ways you can format a USB flash drive. Sonic r game free download pc full version windows 10.

Method 1: Format a USB Flash Drive Using File Explorer

This is the easiest way with which many users are familiar. Refer to the following steps to learn how.

Step 1: Connect your USB flash drive and open press Win key + E to open File Explorer.

Format Thumb Drive Mac Fat32 Flash Drive

Step 2: Right-click on the drive and choose the Format option.

Step 3: Expand the File system drop-down menu and select the exFAToption.

Step 4: Click on the Start button.

Note: Uncheck the Quick Format means full format; it goes with a thorough scanning and wiping your data on the USB flash drive, you will have no chance to get back your data after using this option.

Method 2: Format a USB Flash Drive Using Diskpart

Using diskpart to format a USB flash drive is another useful method, and even it works for the computer user who has no exFAT options in File Explorer or Disk Management. However, the user should select the correct volume before carrying out a quick or full format on your USB flash drive:

Step 1: Enter Command Prompt in the search bar and then right-click it, choose Run as administrator.

Step 2: Enter below-written commands in the same order and same diskpart window:

• diskpart
• list volume
• select volume NUMBER (Replace NUMBER to the exact number of your USB flash drive)
• format fs=exFAT quick (Don't enter quick if you want a full format)

Note: Replace exFAT if you choose another file system, for example, enter the command format fs=fat32 to format the USB flash drive into FAT32 format.

Method 3: Format a USB Drive Using Disk Management

This is a method similar to the one performed by using File Explorer, and here are the steps you can follow:

Step 1: Press Win + Q, type in Disk Management and open it.

Step 2: Right-click on the desired USB flash drive and select Format.

Step 3: Select exFAT from the File System drop-down menu.

Step 4: Click on the OK button.

Method 4: Format a USB Flash Drive Using PowerShell (Windows 10 Only)

PowerShell is a task and configuration management platform which was first appeared in 2006; it's powerful than Command Prompt that can be used to automate many different system administration tasks, and of course, for formatting a USB flash drive:

Step 1: Right-click on the Start menu at the lower-left corner and choose Windows PowerShell(Admin).

Step 2: Enter the following command to view the USB flash drive you want to format:

• Get-Volume
• Format-Volume -DriveLetter F -FileSystem exFAT (Replace F to the exact drive letter of your USB flash drive)

Note: In this method, you should note that after entering the format command, it goes to format the USB flash drive to exFAT directly, and if you want a FAT32 drive, just replace exFAT to FAT32, that's all.

How to Perform a USB Drive Format on Mac?

Reformatting a USB flash drive in exFAT on Mac is easy than you imagine; we should thank the Disk Utility that can make the reformatting easy to complete; Likewise, follow with the same steps if you would like to reformat an SD card, internal or external hard drive:

Step 1: Connect the USB stick to the PC with one of the USB ports and then press Command + Space to search Disk Utility.

Step 2: After selecting the drive on the left part of the Disk Utility window, click on the Erase button lying at the top of the window.

Step 3: Now, select exFAT from the drop-down menu of the Format.

Step 4: Click the Erase and wait for the reformatting process to complete.

Note: Please back up your data before the formatting of your USB flash drive as Erase will wipe all of the stored data!

What if you were not intended to format the USB flash drive, and there are lots of the vital photos, videos, documents, or any other files stored on the drive that have been lost due to the reformatting. What should we do to retrieve lost data? Don't worry, a quick format won't cause all of the data to lose, the file contents still exist on the USB flash drive, and you will have a big chance to get back your data as soon as you launch the third-party data recovery program – Bitwar Data Recovery to perform a full scan.

Recover Files From a Formatted Drive Using Bitwar Data Recovery

No matter how carefully or gradually backing up the USB flash drive, the data loss is still inevitable, such as the USB flash drive turns to a RAW drive suddenly, or you might unplug the drive without safely removing from the computer; moreover, the backup files are out-to-dated when the accident happens.

We have experienced many of the users encountered the same frustrating issue that causes the works to stop, and most of them finally chose to start the work again as they didn't know how to restore the data. Right now, you'll be all set if using Bitwar Data Recovery with the steps below:

Step 1: Go toBitwarsoft Download Center to download and install Bitwar Data Recovery.

Step 2: After completing the installation, open the Bitwar data recovery software and then select the formatted USB flash drive.

Step 3: Choose a recovery mode. We strongly recommend you choose the Quick Scan for the first time since this mode scans the whole drive in just a few minutes. However, if this mode can't work to find your data, try with the Deep Scan mode next time.

Step 4: Choose the File types and then press the Scan button.

Step 5: Double-click on wanted files to preview them. After that, click on Recover to save the files to a safe place.

Note: Please be careful not to save the recovered files to the formatted USB flash drive. The reason is to prevent the data from being overwritten again.

Conclusion

Like many other storage devices, The USB flash drive can be easily failed without any concerns. There are many possible causes behind the happening of this accident, such as the unstable flash chip, disconnect the USB flash drive before safely removing from the computer, virus attack, or Trojan infection. Some of the failures are just logic errors that can be fixed easily by reformatting the drive. Some failures prove that your USB flash drive was physically damaged, and that means you may have to consider buying a new one.

If you purchase a brand-new USB flash drive and want an initial usage or the USB flash drive has encountered any logic errors as told, this article serves you very well, as it tells how to format a USB flash drive with different methods on Windows or Mac. What if there were vital data stored on the USB flash drive, it is suggested to retrieve the data using Bitwar Data Recovery before starting the formatting.

Follow with the steps mentioned above and hope that you can finally reformat the USB flash drive or get back the wanted data.

How useful was this post?

Click on a star to rate it!

Average rating 4.9 / 5. Vote count: 11

No votes so far! Be the first to rate this post.

About Bitwar Data Recovery

Format Flash Drive Mac Fat32 Terminal

3 Steps to get back 500+ kinds of deleted, formatted or lost documents, photos, videos, audios, archive files from various data loss scenarios.

Format Thumb Drive Mac Os